Internet connectivity across the country has been growing at a brisk pace and the FCC has taken steps to ensure that the Internet reaches the interiors of America. The different technologies used to provide Internet connections to customers include dial-up, broadband, cable modem, and DSL. Dial-up is one of the oldest technologies and among the new technologies
Satellite Internet is being preferred by many subscribers. AOL is the leading American company which offers dial-up connections to subscribers and HughesNet is the leading player among Satellite Internet providers. We can draw an interesting analogy when comparing dial-up services to Satellite Internet services. It is like a short garden hose compared to a longer fire hose. It may only take a second for the water to get to the end of the garden hose, but to fill up a pool it can take days. It make take a fraction of a second longer for that water to reach the end of a fire hose but it will only take minutes to fill a pool.
Satellite Internet connections offer faster download and upload speeds as compared to dial-up connectivity. The normal download speed for a dial-up connection is 56 Kbps and for a Satellite Internet connection it varies between 700 Kbps to 1.5 Mbps. Speed is one of the primary reasons why Satellite Internet connectivity scores over dial-up Internet connections. It is not practically possible to download large applications using dial-up connections. The slow speed often ends up in congestion, packet losses and ultimately the connection time-out resulting in a frustrating experience. Dial-up service providers are also gearing up to the competition and are offering features like higher speeds, unique e-mail addresses, Email virus protection, spam controls, Pop up blockers and other functionalities. Monthly charge for dial-up Internet is less than Satellite Internet. While a dial-up connection will cost you approximately $10-$25 per month, satellite Internet services can cost $59.99 to $179.99 per month. Satellite Internet has some upfront costs for installation of dish and modem.
Satellite Internet scores over dial-up and any other modes of Internet connectivity because of the wide reach of the services. In areas where dial-up or cable modem is not accessible, Satellite Internet providers can offer service because connecting to the transponder requires only a dish and a modem. Cabling is not required like the other modes of Internet connectivity. The cost of Satellite Internet is a roadblock and people in the cities prefer using broadband or DSL connectivity. The major players offering dial-up connections in America include AOL, NetZero and Juno and AOL leads the race.
Satellite Internet is capturing a quick market share and customers no longer prefer dial-up connectivity because of the slow speed and many other disadvantages. Subscribers who have used dial-up for a long time may take sometime to realize the benefits of other technologies. A brief analysis of dial-up and satellite modem will help anyone understand the many advantages that Satellite Internet over dial-up. It can be safely concluded that Satellite Internet is slightly more expensive but a better option to connect to the Internet than dial-up.
More at:
http://www.GetDSLtoo.com/
11/6/07
Web Tools to Hook a Visitor
The web design process is a lengthy one and requires versatility to generate the best outcome.
However, a best web designer Atlanta may not necessarily be equipped with the right knowledge, instruments and techniques to bring out the best. There may be certain website issues not paid attention to by the designers that don’t make a whole amount of difference. Web design and content are the main driving factors but these can be ignored due to unnecessary indulgence by the webmaster. Here are some things that the designer must keep in mind before publicizing the website.Never Overbuild A Page A clear, concise and informative page can be better than a page loaded with advertisements and animations. A webmaster must not spread the page with fillers and columns like a newspaper. There should be only one path on which you must make the visitor walk on, i.e. your goal. Other unnecessary columns and advertisements will distract your customers and puzzle them thus creating a business loss for you in the long term. Show the audience one thing at a time and lead them to your websites goal.Reduce Images On Top PageThe most common complaint that people have is that the header area of a webpage in a snail-paced loading area. This happens when a webmaster uploads too many pictures and complex tools on the front pages of the website. Do not try to allure the visitors with fancy items, pictures, videos, etc. Pictures must be used where necessary. Of course, a picture is a worth a 1000 words. Nevertheless, it must be considered strategically. It is important to make web pages that download quickly and in sequence with the rest of the site.Do Not Sing Logo IntrosDo not portray the organisations logo on the front page asking the user to click the logo to enter into the website. This can be a tiring process for the user and he will simply move onto your competitors user-friendly web pages. This can be time consuming and irritating for the first-time visitor. Therefore, a webmaster must avoid this common mistake.Text Links Can HelpMany websites offer text links that do not allow the users to wait for an intro to finish or a large amount of data to load. Placing these text links on a visible place on the page can guide the users to the subsequent link immediately. This can help to save on time through quick downloading. The most convenient page to page links may be at the top of the page. Moreover the customers logging on will not need to wait and can gain access to your website immediately without any inconvenience.Content And KeywordsThe content and keywords should match the websites content. Try to avoid pictures as they take time to download and distract the customers away from your website. The content can do wonders if put in a presentable form with rich keywords that target the market you want to attract.
However, a best web designer Atlanta may not necessarily be equipped with the right knowledge, instruments and techniques to bring out the best. There may be certain website issues not paid attention to by the designers that don’t make a whole amount of difference. Web design and content are the main driving factors but these can be ignored due to unnecessary indulgence by the webmaster. Here are some things that the designer must keep in mind before publicizing the website.Never Overbuild A Page A clear, concise and informative page can be better than a page loaded with advertisements and animations. A webmaster must not spread the page with fillers and columns like a newspaper. There should be only one path on which you must make the visitor walk on, i.e. your goal. Other unnecessary columns and advertisements will distract your customers and puzzle them thus creating a business loss for you in the long term. Show the audience one thing at a time and lead them to your websites goal.Reduce Images On Top PageThe most common complaint that people have is that the header area of a webpage in a snail-paced loading area. This happens when a webmaster uploads too many pictures and complex tools on the front pages of the website. Do not try to allure the visitors with fancy items, pictures, videos, etc. Pictures must be used where necessary. Of course, a picture is a worth a 1000 words. Nevertheless, it must be considered strategically. It is important to make web pages that download quickly and in sequence with the rest of the site.Do Not Sing Logo IntrosDo not portray the organisations logo on the front page asking the user to click the logo to enter into the website. This can be a tiring process for the user and he will simply move onto your competitors user-friendly web pages. This can be time consuming and irritating for the first-time visitor. Therefore, a webmaster must avoid this common mistake.Text Links Can HelpMany websites offer text links that do not allow the users to wait for an intro to finish or a large amount of data to load. Placing these text links on a visible place on the page can guide the users to the subsequent link immediately. This can help to save on time through quick downloading. The most convenient page to page links may be at the top of the page. Moreover the customers logging on will not need to wait and can gain access to your website immediately without any inconvenience.Content And KeywordsThe content and keywords should match the websites content. Try to avoid pictures as they take time to download and distract the customers away from your website. The content can do wonders if put in a presentable form with rich keywords that target the market you want to attract.
Programmable Logic Cobtrollers
A programmable logic controller (PLC), is a digital computer used for automation of industrial processes, such as control of machinery on factory assembly lines. The PLCs are widely used in indutrial automation. For details on industrial automation:
http://iautomation.blogspot.com/
The PLC is designed for multiple inputs and output arrangements, extended temperature ranges, immunity to electrical noise, and resistance to vibration and impact. Programs to control machine operation are typically stored in battery-backed or non volatile memory. A PLC is an example of a real time system since output results must be produced in response to input conditions within a bounded time, otherwise unintended operation will result.
http://iautomation.blogspot.com/
The PLC is designed for multiple inputs and output arrangements, extended temperature ranges, immunity to electrical noise, and resistance to vibration and impact. Programs to control machine operation are typically stored in battery-backed or non volatile memory. A PLC is an example of a real time system since output results must be produced in response to input conditions within a bounded time, otherwise unintended operation will result.
New Usb Thumb Drive Data Storage Devices, Faster and Bigger But More Secure?
Today, there are so many companies making USB thumb drives, many of these devices are faster, bigger and more compact, but are they a safe means to hold your companies important data?
Secure USB Thumb Drives
Flash memory manufacturer Corsair says it has solved the problem of non secured flash drives by forcing you to enter a unique PIN code to enter their USB thumb drive and access your data.
It's a great idea but will it really help?
This "Flash Padlock" USB thumb drive protects file records and data with a unique PIN that you enter on the built in touchpad on the actual USB flash drive shell. You then enter the device into your USB plug on your laptop or desktop and the device operates as extra external memory. Corsair said the device is much more resistant to brute force attacks or keystroke loggers.
You see keystroke loggers record any keystroke you make on your keyboard. In other words, when you type in your password on your keyboard to unlock a secured USB thumb drive, and if a hacker has gotten a program of theirs on your device it would record your password as you type them (all of them). Every so often these keyloger programs send these simple text files via a build in e-mail program to their own e-mail inbox. This is bad!
The new Corsair device would ask that you type in your password before you plug your storage device into your computer USB flash drive port (USB port). So in essence the keylogger hacker programs would never have a chance to record your computers keystrokes and there would be no way for them to access your data.
"Featuring auto-lock hardware security, Flash Padlock is the best way to secure your data while on the go. It prevents any unauthorized access or "Brute Force" attacks to the data on the Flash Padlock. Users can program in a PIN, much like they do for an ATM machine, to lock/unlock their data. An easy to use keypad in conjunction with lock/unlock indicator lights makes the Flash Padlock easy to use. The Flash Padlock is fully plug-and-play, and requires no software or drivers to work properly."
The Flash Padlock will auto lock after 15 seconds if removed from the computer. This ensures your data stays locked-up, if you forget to lock the device this thing does it by itself (I love things that make sense). The Flash Padlock USB storage device will work with Linux, Mac OS X and Windows based computers.
At the moment the Flash Padlock is available in 1GB and 2GB capacities starting from $29.99. For more information on this specific device visit this URL:
http://www.corsair.com/products/padlock.aspx
As we are on the topic of Corsair let's continue. Are you a flash survivor, corsair thinks it is. "Corsair Introduces Flash Survivor -- Extremely Rugged USB 2.0 Flash Drive"
Rugged USB Thumb Drives
As the owner of eProvided, a digital image recovery company which also specializes in advanced USB data recovery, we know a good idea when we see one. What this all comes down to is feedback from users that have purchased this device. If we do not see these devices come in to our labs then there is a good chance either no-one is buying them or they are not having issues of damage. The most common type of USB memory stick damage is when the USB port is broken or breaks off from the USB drive itself.
A common cause of USB thumb drive damage is from users plugging these devices into their laptop or ground based desktops and bumping the device while it is plugged in. This causes the part of the USB thumb drive that plugs into the USB slot on their computer to break off. Most of these breaks are very serious as the internal circuits and parts inside the USB thumb drive are permanently damaged. "USB Device Not Recognized" error messages may appear after such an incident.
You may also have a windows error message such as "USB Unknown Device". This is a sign that your device has suffered serious damage to the circuitry. At this point you will need a data recovery company to assist you. Consumers need to buy devices that are more rugged and are made by larger names in the storage industry. Flash Survivor™ is an exceptionally tough, water resistant, drop-tested flash USB memory stick storage device.
A design made ideally for transporting valuable data such as personal files, jpeg images and personal applications without having to be bothered by the chance for damage or loss of data due to various natural elements.
So use your noggin and buy strong devices and keep the contact information of those who may be able to help you in case of data loss on USB thumb drives. This story is brought to you at no charge (Smiling) so please bookmark our site (http://www.eprovided.com) and send this story to a friend right now.
Secure USB Thumb Drives
Flash memory manufacturer Corsair says it has solved the problem of non secured flash drives by forcing you to enter a unique PIN code to enter their USB thumb drive and access your data.
It's a great idea but will it really help?
This "Flash Padlock" USB thumb drive protects file records and data with a unique PIN that you enter on the built in touchpad on the actual USB flash drive shell. You then enter the device into your USB plug on your laptop or desktop and the device operates as extra external memory. Corsair said the device is much more resistant to brute force attacks or keystroke loggers.
You see keystroke loggers record any keystroke you make on your keyboard. In other words, when you type in your password on your keyboard to unlock a secured USB thumb drive, and if a hacker has gotten a program of theirs on your device it would record your password as you type them (all of them). Every so often these keyloger programs send these simple text files via a build in e-mail program to their own e-mail inbox. This is bad!
The new Corsair device would ask that you type in your password before you plug your storage device into your computer USB flash drive port (USB port). So in essence the keylogger hacker programs would never have a chance to record your computers keystrokes and there would be no way for them to access your data.
"Featuring auto-lock hardware security, Flash Padlock is the best way to secure your data while on the go. It prevents any unauthorized access or "Brute Force" attacks to the data on the Flash Padlock. Users can program in a PIN, much like they do for an ATM machine, to lock/unlock their data. An easy to use keypad in conjunction with lock/unlock indicator lights makes the Flash Padlock easy to use. The Flash Padlock is fully plug-and-play, and requires no software or drivers to work properly."
The Flash Padlock will auto lock after 15 seconds if removed from the computer. This ensures your data stays locked-up, if you forget to lock the device this thing does it by itself (I love things that make sense). The Flash Padlock USB storage device will work with Linux, Mac OS X and Windows based computers.
At the moment the Flash Padlock is available in 1GB and 2GB capacities starting from $29.99. For more information on this specific device visit this URL:
http://www.corsair.com/products/padlock.aspx
As we are on the topic of Corsair let's continue. Are you a flash survivor, corsair thinks it is. "Corsair Introduces Flash Survivor -- Extremely Rugged USB 2.0 Flash Drive"
Rugged USB Thumb Drives
As the owner of eProvided, a digital image recovery company which also specializes in advanced USB data recovery, we know a good idea when we see one. What this all comes down to is feedback from users that have purchased this device. If we do not see these devices come in to our labs then there is a good chance either no-one is buying them or they are not having issues of damage. The most common type of USB memory stick damage is when the USB port is broken or breaks off from the USB drive itself.
A common cause of USB thumb drive damage is from users plugging these devices into their laptop or ground based desktops and bumping the device while it is plugged in. This causes the part of the USB thumb drive that plugs into the USB slot on their computer to break off. Most of these breaks are very serious as the internal circuits and parts inside the USB thumb drive are permanently damaged. "USB Device Not Recognized" error messages may appear after such an incident.
You may also have a windows error message such as "USB Unknown Device". This is a sign that your device has suffered serious damage to the circuitry. At this point you will need a data recovery company to assist you. Consumers need to buy devices that are more rugged and are made by larger names in the storage industry. Flash Survivor™ is an exceptionally tough, water resistant, drop-tested flash USB memory stick storage device.
A design made ideally for transporting valuable data such as personal files, jpeg images and personal applications without having to be bothered by the chance for damage or loss of data due to various natural elements.
So use your noggin and buy strong devices and keep the contact information of those who may be able to help you in case of data loss on USB thumb drives. This story is brought to you at no charge (Smiling) so please bookmark our site (http://www.eprovided.com) and send this story to a friend right now.
Losing Data From Hard Drive
Storage, more commonly, has been divided into primary storage which holds data in memory (RAM or random access memory) and other built-in devices such as processors L1 and L2 cache; the other is the secondary storage which holds data on hard disks, tapes and other devices requiring input/ output operations.
Primary storage is much faster to access than secondary storage because of the proximity of the storage to the processor or because of the nature of the storage devices. On the other hand, secondary storage devices have larger capacities to hold data than primary storage devices.
Storage often is used to mean devices and data connected through input/ output operations, that is, hard disk and tape systems. So the term storage has become synonymous with secondary storage in common parlance.
The options of secondary storage in terms of variety and pricing are much greater. The development in digital technology is associated with development of new and better secondary storage devices such as hard disk, floppy disks, CDs and tape drives.
A hard disk holds the maximum amount of data for a PC. It stores and provides a relatively quick access to large amount of data on an electromagnetically charged surface or a set of surfaces. Present-day computers come with a hard disk that contains several billion byte of storage.
Hard disk is really a set of stacked up disks just like phonograph records which have data recorded on them in concentric circles (tracks) electromagnetically. A fixed head records (writes) and reads the information on these concentric tracks. Two heads, one on each side of the disk, read and write the data as the disks spin with great speed.
Hard disks have huge storage capacities and they provide random access to the information stored on them. They have long life spans and data can be written, created, shifted, modified and erased any number of times on them. This makes them an irreplaceable storage device.
Hard disks like all other storage devices can lose data due to various reasons. These could be software errors often triggered by the users themselves. These include an accidental deletion of a file and emptying of recycle bin by mistake. Another software error could be due to virus attack on the system while downloading data from internet or through copying of corrupt CDs.
The physical errors leading to hard disk data loss include first and foremost the hard disk crash.
This is when the closely suspended read/ write head becomes loose and crashes on the rapidly spinning platter. This platter is the recording surface on which the data is stored. The head severely scratches the platter leading to data loss and damage. Other hardware errors could be caused by natural calamities, electrical surge, impact trauma and so on.
Losing data from the hard disk can be a serious setback to the user. There is hope, however, as the data can still be recovered. Contrary to popular belief, deleted files, though not available to the operating system of the computer, are still on the drive. Only the names of the files are deleted from the table of contents which results in operating system’s failure in locating the files.
This makes the system mark the space occupied by these files on the drive as vacant. Vacant space can always be used to store or write new data leading to deletion or overwriting of the files.
To prevent this from happening when a disk crashes and some data is lost, the user should immediately stop working on the computer immediately. He should not run a programme, write mails or browse the net or even install DIY software. All these activities carry the threat of creating new files and overwriting the existing files. Any overwritten data will be lost forever.
In case of a hard drive crash also, no attempt should be made by the user to rectify the situation. He should immediately call a data recovery company who will take the crashed hard disk and open it in a dust-free clean room. It needs expertise and experience to retrieve any data from a crashed hard disk and only professionals can do a good job of it. They copy the recovered data on a new disk to be handed over to the user.
To prevent any critical situation like the one mentioned above, one should have an adequate and timely updated backup of all crucial data. A properly stored backup will serve you well in times of need.
Primary storage is much faster to access than secondary storage because of the proximity of the storage to the processor or because of the nature of the storage devices. On the other hand, secondary storage devices have larger capacities to hold data than primary storage devices.
Storage often is used to mean devices and data connected through input/ output operations, that is, hard disk and tape systems. So the term storage has become synonymous with secondary storage in common parlance.
The options of secondary storage in terms of variety and pricing are much greater. The development in digital technology is associated with development of new and better secondary storage devices such as hard disk, floppy disks, CDs and tape drives.
A hard disk holds the maximum amount of data for a PC. It stores and provides a relatively quick access to large amount of data on an electromagnetically charged surface or a set of surfaces. Present-day computers come with a hard disk that contains several billion byte of storage.
Hard disk is really a set of stacked up disks just like phonograph records which have data recorded on them in concentric circles (tracks) electromagnetically. A fixed head records (writes) and reads the information on these concentric tracks. Two heads, one on each side of the disk, read and write the data as the disks spin with great speed.
Hard disks have huge storage capacities and they provide random access to the information stored on them. They have long life spans and data can be written, created, shifted, modified and erased any number of times on them. This makes them an irreplaceable storage device.
Hard disks like all other storage devices can lose data due to various reasons. These could be software errors often triggered by the users themselves. These include an accidental deletion of a file and emptying of recycle bin by mistake. Another software error could be due to virus attack on the system while downloading data from internet or through copying of corrupt CDs.
The physical errors leading to hard disk data loss include first and foremost the hard disk crash.
This is when the closely suspended read/ write head becomes loose and crashes on the rapidly spinning platter. This platter is the recording surface on which the data is stored. The head severely scratches the platter leading to data loss and damage. Other hardware errors could be caused by natural calamities, electrical surge, impact trauma and so on.
Losing data from the hard disk can be a serious setback to the user. There is hope, however, as the data can still be recovered. Contrary to popular belief, deleted files, though not available to the operating system of the computer, are still on the drive. Only the names of the files are deleted from the table of contents which results in operating system’s failure in locating the files.
This makes the system mark the space occupied by these files on the drive as vacant. Vacant space can always be used to store or write new data leading to deletion or overwriting of the files.
To prevent this from happening when a disk crashes and some data is lost, the user should immediately stop working on the computer immediately. He should not run a programme, write mails or browse the net or even install DIY software. All these activities carry the threat of creating new files and overwriting the existing files. Any overwritten data will be lost forever.
In case of a hard drive crash also, no attempt should be made by the user to rectify the situation. He should immediately call a data recovery company who will take the crashed hard disk and open it in a dust-free clean room. It needs expertise and experience to retrieve any data from a crashed hard disk and only professionals can do a good job of it. They copy the recovered data on a new disk to be handed over to the user.
To prevent any critical situation like the one mentioned above, one should have an adequate and timely updated backup of all crucial data. A properly stored backup will serve you well in times of need.
Industrial Espionage and Computer Forensics
They intensely scrutinise their websites, corporate publications, patent filings and the like to decipher opponent activity.
Over the years, with the intensifying of competition and enlargement of profitability in business ventures, corporate officials began resorting to innovative methods for obtaining information of their rivals. Unfortunately, in the feverish pitch of intense surveillance they failed to remain within legal confines. They gradually began transcending legal lines, and obtainment of information by unethical means soon became a widespread practice. Such illegitimate obtainment of information pertaining to business adversaries is called ‘industrial espionage.’
Industrial Espionage
Industrial espionage refers to all the undercover activities that are performed by entrepreneurs for acquiring information of their business rivals for commercial gain. As such spying exercises are practised by some leaders in the corporate world, the term 'industrial espionage' has turned synonymous with 'corporate espionage.' Targeted victims of espionage activities range from rival business organisations to governmental agencies. Invariably, these deceived business units suffer huge monetary losses. Yet, they fail to report such criminal activity for fear of losing customer confidence or shareholder interest.
Moreover, the real perpetuators are the executives of large companies, and they are rarely prosecuted. It is the small-time offender who gets sentenced. Invariably, the transgressor gets apprehended in the very act – that of stealing the much sought-after business information.
The Much Sought After Business Information
Business competitors on the prowl, seek information of all kinds. Every bit of information that is accessed is valuable and used appropriately. Strategy papers, engineering designs, and details of new products help entrepreneurs supplement the information they have already gathered through reverse engineering. (Reverse engineering is the process of purchasing rival products and dismantling them to learn the secrets of the implemented technical know-how.) Client data base, supplier agreements, information pertaining to tender bids, future plans of mergers, etc help them bid competitively for tenders and gain a winning edge in competition.
Information collection methods vary. Agents might be recruited to work in the rival company and pass on the accessed information. Bribery of the employees of rival organisation is also adopted. However, these traditional methods rely on engaging people to do the illicit work. The advent of computers has digitalised industrial espionage methods and has given a modern twist to white collared crime.
Stealing Information in the Digital Age
The most blatant of methods of industrial espionage are stealing laptops or breaking into the offices of the opponent and walking away with their desktops. A few cases of espionage activity came to light when bribed employees in the ‘research and development’ wing of a well-known organisation were caught burning sensitive information on to the CDs. Usually, the avaricious employees in any organisation prove to be the weakest link of the security chain. Such unethical employees are identified and approached by contacting them online.
Other unobtrusive digital methods pertain to installing key logger software programs that are used to record the keystrokes of the pc user. With this it is easy to gain access to user activity that would also include obtaining passwords, emails, etc. Detecting such spyware activity is becoming difficult as attackers have invented ways to avoid detection. Even if spyware activity is detected, pinning key logger activity as an industrial espionage act is difficult. Only digital forensics can help in such a scenario.
Role of Digital Forensics in Tracking down Culprits
Bribed employees of an organisation (who transmit vital business information online) are often tricked into complacency. They press the delete key of their pc and rest assured that they are leaving no physical proof of their criminal activity. However, nothing can be farther from the truth. The peculiarity of digital proof is that it does not visibly exist. User activity gets embedded in the computer hard disk and such digital proof is almost impossible to obliterate. Computer forensic experts use specialised tools and equipments and unearth such evidence and track down criminals.
Corporate espionage is wrong and all measures must be taken to put an end to it. Effects of industrial espionage are dangerous in their ramifications. They not only lead businesses to bankruptcy but also affect the ties with friendly nations. When acts of industrial espionage, which surpass national boundaries, get revealed, it makes allied nations momentarily vacillate and doubt the validity of good relationships.
Over the years, with the intensifying of competition and enlargement of profitability in business ventures, corporate officials began resorting to innovative methods for obtaining information of their rivals. Unfortunately, in the feverish pitch of intense surveillance they failed to remain within legal confines. They gradually began transcending legal lines, and obtainment of information by unethical means soon became a widespread practice. Such illegitimate obtainment of information pertaining to business adversaries is called ‘industrial espionage.’
Industrial Espionage
Industrial espionage refers to all the undercover activities that are performed by entrepreneurs for acquiring information of their business rivals for commercial gain. As such spying exercises are practised by some leaders in the corporate world, the term 'industrial espionage' has turned synonymous with 'corporate espionage.' Targeted victims of espionage activities range from rival business organisations to governmental agencies. Invariably, these deceived business units suffer huge monetary losses. Yet, they fail to report such criminal activity for fear of losing customer confidence or shareholder interest.
Moreover, the real perpetuators are the executives of large companies, and they are rarely prosecuted. It is the small-time offender who gets sentenced. Invariably, the transgressor gets apprehended in the very act – that of stealing the much sought-after business information.
The Much Sought After Business Information
Business competitors on the prowl, seek information of all kinds. Every bit of information that is accessed is valuable and used appropriately. Strategy papers, engineering designs, and details of new products help entrepreneurs supplement the information they have already gathered through reverse engineering. (Reverse engineering is the process of purchasing rival products and dismantling them to learn the secrets of the implemented technical know-how.) Client data base, supplier agreements, information pertaining to tender bids, future plans of mergers, etc help them bid competitively for tenders and gain a winning edge in competition.
Information collection methods vary. Agents might be recruited to work in the rival company and pass on the accessed information. Bribery of the employees of rival organisation is also adopted. However, these traditional methods rely on engaging people to do the illicit work. The advent of computers has digitalised industrial espionage methods and has given a modern twist to white collared crime.
Stealing Information in the Digital Age
The most blatant of methods of industrial espionage are stealing laptops or breaking into the offices of the opponent and walking away with their desktops. A few cases of espionage activity came to light when bribed employees in the ‘research and development’ wing of a well-known organisation were caught burning sensitive information on to the CDs. Usually, the avaricious employees in any organisation prove to be the weakest link of the security chain. Such unethical employees are identified and approached by contacting them online.
Other unobtrusive digital methods pertain to installing key logger software programs that are used to record the keystrokes of the pc user. With this it is easy to gain access to user activity that would also include obtaining passwords, emails, etc. Detecting such spyware activity is becoming difficult as attackers have invented ways to avoid detection. Even if spyware activity is detected, pinning key logger activity as an industrial espionage act is difficult. Only digital forensics can help in such a scenario.
Role of Digital Forensics in Tracking down Culprits
Bribed employees of an organisation (who transmit vital business information online) are often tricked into complacency. They press the delete key of their pc and rest assured that they are leaving no physical proof of their criminal activity. However, nothing can be farther from the truth. The peculiarity of digital proof is that it does not visibly exist. User activity gets embedded in the computer hard disk and such digital proof is almost impossible to obliterate. Computer forensic experts use specialised tools and equipments and unearth such evidence and track down criminals.
Corporate espionage is wrong and all measures must be taken to put an end to it. Effects of industrial espionage are dangerous in their ramifications. They not only lead businesses to bankruptcy but also affect the ties with friendly nations. When acts of industrial espionage, which surpass national boundaries, get revealed, it makes allied nations momentarily vacillate and doubt the validity of good relationships.
Help, I Have a Broken Usb Flash Drive or Damaged Digital Camera Card, No Connection or Lights, It's Dead!
Whatever the Damage or Device; See eProvided.com for USB Data Recovery, Digital Image Recovery & USB Repair, Get Your Data Back!
All of a sudden your data is lost. You have a damaged or broken USB thumb drive or digital camera flash card & your data files or digital images are gone. eProvided to the rescue; whether lost, destroyed or damaged; there is now an advanced data recovery solution. eProvided data recovery service goes past the do it yourself online data recovery software recovery tools. eProvided fixes and repairs damaged circuits or controllers on the devices themselves to get your data back.People worldwide use USB flash memory devices, thumb drives, digital cameras, flash memory sticks, (NAND flash) USB drives, cell phones, iPods, voice recorders, music players, etc. When something cracks, breaks, drops, is stepped on or bent, there is hope. USB device not recognized issues are common today, if the message appears on Windows XP or Windows Vista help is here; allow eProvided to recover your lost data.
If you use digital camera flash memory, USB sticks or any flash memory storage media and have images & data you can't get back, eProvided will help. Most people think they've lost their digital photos or personal data permanently. Greater than 90% of the digital image recovery & USB data recovery cases eProvided handles are successful recoveries. eProvided, one of the fastest growing USB recovery & digital photo recovery companies globally. The company's president, Mr. Cullen, and his personnel have a wealth of expertise in USB repair & digital photo recovery, assisting flash memory users worldwide.eProvided recovers data by replacing NAND flash memory chips, controllers and microcircuits, wafers or capacitors, crystals, or damaged device on the internal board of the devices. With this type of advanced data recovery you can't get any more sophisticated, if eProvided can't recover data on your device then no one will. The process recovers lost images and lost data from all corrupt, deleted, or damaged flash media storage devices. A majority of successful data recovery issues begin when plugged in USB flash drives are bumped causing the port to break off.eProvided Recovers: All USB Thumb Drives All USB Flash Drives All Digital Camera Cards CompactFlash Sony Memory Stick Memory Stick Duo SDHC MMC-SD MicroSD MMC - RS MMC SD Hard Drives Digital Voice Recorder Memory Stick Micro USB Hard Drives CD-RW CD-R DVD-RW DVD-R iPod XD MiniSD Transflash all others... All digital media storage devices are recoverable; data is delivered on CD-Rom, DVD or hard drives and is immediately available via instant download online anywhere on earth with an Internet connection in 12-24 hours or less if requested. Organizations are welcome to partner with eProvided and receive special discounts for services performed for their customers. Camera stores, data recovery software companies, data recovery companies, Costcos, Wal-Marts, flash device manufacturers, etc.
All of a sudden your data is lost. You have a damaged or broken USB thumb drive or digital camera flash card & your data files or digital images are gone. eProvided to the rescue; whether lost, destroyed or damaged; there is now an advanced data recovery solution. eProvided data recovery service goes past the do it yourself online data recovery software recovery tools. eProvided fixes and repairs damaged circuits or controllers on the devices themselves to get your data back.People worldwide use USB flash memory devices, thumb drives, digital cameras, flash memory sticks, (NAND flash) USB drives, cell phones, iPods, voice recorders, music players, etc. When something cracks, breaks, drops, is stepped on or bent, there is hope. USB device not recognized issues are common today, if the message appears on Windows XP or Windows Vista help is here; allow eProvided to recover your lost data.
If you use digital camera flash memory, USB sticks or any flash memory storage media and have images & data you can't get back, eProvided will help. Most people think they've lost their digital photos or personal data permanently. Greater than 90% of the digital image recovery & USB data recovery cases eProvided handles are successful recoveries. eProvided, one of the fastest growing USB recovery & digital photo recovery companies globally. The company's president, Mr. Cullen, and his personnel have a wealth of expertise in USB repair & digital photo recovery, assisting flash memory users worldwide.eProvided recovers data by replacing NAND flash memory chips, controllers and microcircuits, wafers or capacitors, crystals, or damaged device on the internal board of the devices. With this type of advanced data recovery you can't get any more sophisticated, if eProvided can't recover data on your device then no one will. The process recovers lost images and lost data from all corrupt, deleted, or damaged flash media storage devices. A majority of successful data recovery issues begin when plugged in USB flash drives are bumped causing the port to break off.eProvided Recovers: All USB Thumb Drives All USB Flash Drives All Digital Camera Cards CompactFlash Sony Memory Stick Memory Stick Duo SDHC MMC-SD MicroSD MMC - RS MMC SD Hard Drives Digital Voice Recorder Memory Stick Micro USB Hard Drives CD-RW CD-R DVD-RW DVD-R iPod XD MiniSD Transflash all others... All digital media storage devices are recoverable; data is delivered on CD-Rom, DVD or hard drives and is immediately available via instant download online anywhere on earth with an Internet connection in 12-24 hours or less if requested. Organizations are welcome to partner with eProvided and receive special discounts for services performed for their customers. Camera stores, data recovery software companies, data recovery companies, Costcos, Wal-Marts, flash device manufacturers, etc.
Subscribe to:
Posts (Atom)